PAX S90 - Page 183

Chapter 6
How to Set the POS terminal
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 176
6.7.3.1.1 EDC Tip
Note
EDC Tip allows the user to enable/disable the active tips for individual
EDC types.
STEP
ACTION
DISPLAY
1.
From the System Settings menu, press [3] for
Working Mode.
2.
Press [ENTER]
3.
Input the Password and press [ENTER]
4.
Press [ENTER] for EDC Tips.
5.
Select the EDC type.
6.
Current setting is displayed in the first line.
Press [1] to disable tips for the selected EDC type.
OR
Press [2] to enable tips for the selected EDC type.
7.
Stop.
WORKING MODE:
1. Tip Options
2. Fraud Control
3. Comment Opt.
ENTER PASSWORD:
TIP OPTIONS:
1. EDC Tip
2. Tip 1: (OFF)
3. Tip 2: (OFF)
4. Tip 3: (OFF)
SYSTEM OPTIONS:
1. Date/ Time Setup
2. Batch Number
3. Working Mode
4. Pre-Dial Call
SELECT PMT TYPE:
1. CREDIT
2. DEBIT
3. EBT
4. GIFT
EDC Tip: 2
1. OFF
2. ON