PAX S90 User Manual

Chapter 4
How to Do Transaction
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission. 19
7.
Input the dollar amount of the transaction then
press [ENTER]
8.
This is a feature of the Invoice Mode.
When prompted, enter the invoice No. then press
[ENTER].
9.
This is a feature of the Clerk/Server ID Mode.
When prompted, enter the clerk/server ID then
press [ENTER].
10.
This is a feature of the Table Mode.
When prompted, enter the table number then press
[ENTER].
11.
This is a feature of the Guest No. Mode.
When prompted, enter the number of guests then
press [ENTER].
12.
If the account number was manually entered, the terminal will ask if the card
is present. Depending on the user’s response the terminal will prompt for
V-code and other AVS settings.
* Dependent upon Fraud Control settings.
13.
Press [1] if the card is present.
OR
Press [2] if the card is not present.
14.
Enter the V-code from the back of the credit card
then press [ENTER].
15.
Enter the street address then press [ENTER].
i.e.: If billing address is 123 Main St., enter 123.
___________________
Street Address:
___________________
_________________
ENTER CVV2:
_________________
IS CARD PRESENT?
1. Yes
2. No
CREDIT AUTH
AMOUNT 0.00
___________________
ENTER INVOICE #:
___________________
___________________
ENTER CLERK ID:
___________________
___________________
ENTER TABLE NO:
___________________
___________________
NUMBER OF GUESTS
___________________

PAX S90 Specifications

General

Brand	PAX
Model	S90
Category	Payment Terminal
Language	English