85
Table 3
Service mode – coin diagnostics
When a coin is not recognized with ‘Service mode’ enabled in Fn23, the message INH** is displayed on EAGLE
LCD followed by a number.
Table 3 contains a list of error messages.
INH 1
Unidentified Check EAGLE configuration
INH 2
EAGLE in Exact-Change condition
Fn03: check the option “Coin no.** Exact-
Change = Y/N”
INH 3
Euro coin rejected because EAGLE is configured
in NCU
Fn03: check the option “Coin Euro? Y”
Select “N” to accept coins
INH 4
nonEuro coin rejected because EAGLE is
configured in Euro (=978)
Fn03: check the option “Coin Euro? N”
Select “Y” to accept coins
INH 5
No key has been inserted (but option “Coin
No.** with Cashless = Y”)
Fn03: check the option “Coin No.** with
Cashless? N”. Select “Y” to accept coins
INH 6
Key inserted but cannot be recharged Pull out the key and then reinsert it
INH 11
Key inserted whose credit is higher than the max.
credit
Fn00: check “Maximum credit cashless=___;
modify the value
INH 12
Current credit is higher than max. price
programmed
Fn04: check “Price max *****”
INH 13
Current credit is higher than max. price
programmed
Fn00: check “Maximum credit with cash=.*****;
modify the value
INH 14
Key cannot be recharged
Fn15: check “Inhibit reload Cashless? Y”.
Select “N” to accept
INH 15
Coins are only accepted when a key has been
inserted
Fn00: check option “Coins only with Key? N”.
Select “Y” to accept
INH 16
TestServiceKey inserted Fn15: check option “Coins and bills test?”
INH 17
General ServiceKey inserted (key with blocs, …)
Insert a compatible user key
INH 18
EAGLE in free vend mode Fn07: check time bands for free vends
INH 19
Current credit is higher than 65535 Limit credit
INH --
To Next Page
Loading...