36 Document Number: PD196-103 Rev 1
Channel Setup
Copy Service Level
Copies one service level of another.
1. From the Channel Setup menu, press the
CH▲ / CH▼ buttons to select Copy
Service Level menu. A Copy Service
Level menu appears and shows a source
(From) and destination (To) Service
Level.
2. Press the CH▲ button to adjust the From
Service Level.
3. Press the Press the CH▼ button to select
the To Service Level.
4. Press the VOL◄ / VOL► button once. A
Confirm Copy menu appears.
5. Press the CH▲ to confirm clearing of the
selected Service Level. Press the CH▼
button to exit without making any
changes to the selected Service Level.
6. Press the SETUP button to return to the
preceding menu.
To Next Page
Loading...
