MY19-P073_1.0_09.11.2018
108
Accessories
8.4.2 Bicycle trailer
A bicycle which is approved for towing a trailer is
equipped with the relevant information sign. Only
bicycle trailers with a support load and total mass
which do not exceed the permitted values must be
used.
The specialist dealer will advise on choosing a suitable
child seat system for the child and the bicycle.
The specialist dealer must mount the child seat the first
time to ensure that it is safely fitted.
When installing a child seat, the specialist dealer
makes sure that the fastening mechanism for the seat
is suitable for the bicycle and that all components are
installed and firmly fastened. They will also ensure that
shift cables, brake cables and hydraulic & electrical
cables are adjusted as necessary, the rider's freedom
of movement is not restricted and the bicycle's
permitted total weight is not exceeded.
The specialist dealer will provide instruction on how to
handle the bicycle and the child seat.
Crash caused by brake failure
The brake may not work sufficiently if there is an
excessive trailer load. The long braking distance can
cause a crash or an accident and injuries.
Never exceed the specified trailer load.
The operating and safety notes for the trailer
system must be observed.
The statutory regulations on the use of bicycle
trailers must be observed.
Only use type-approved coupling systems.
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 108 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...
