MY19-P073_1.0_09.11.2018
91
Maintenance
8.1.2.7 Cleaning the brake
Clean brake and brake discs with a brush, water
and dish-washing detergent.
Clean brake discs thoroughly with brake cleaner or
spirit.
8.1.3 Servicing
8.1.3.1 Servicing the frame
Dry frame after cleaning
Spray with care oil Clean off the care oil again after
a short time.
8.1.3.2 Servicing the stem
Apply silicone or Teflon oil to the stem shaft tube
and the quick release lever pivot point.
If you have speedlifter Twist, also apply oil to the
unlocking bolt using the groove in the speedlifter
body.
Apply a little acid-free lubricant grease between the
stem quick release lever and the sliding piece to
reduce the quick release lever operating force.
Brake failure due to water penetration
The brake seals are unable to withstand high
pressures. Damaged brakes can fail and cause an
accident with injury.
Never clean the bicycle with a high-pressure water
device or compressed air.
Take great care when using a hosepipe. Never
point the water jet directly at the seal section.
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 91 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...
