MY19-P073_1.0_09.11.2018
61
Before the first ride
Adjusting the stem
6.2.1 Adjusting the height of the handlebars
Open the clamping lever.
Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
You feel the locking lever click into place.
Pull out the handlebars to the required height.
Lock the quick release.
Crash caused by loose stem
Incorrectly fastened screws may come loose due to
impact. The stem may no longer be firmly fixed in its
position as a result. This will result in a crash and
injuries.
Check the handlebars and the quick release system
are firmly in position after the first two hours of
riding.
Crash caused by incorrectly set clamping force
Excessively high clamping force will damage the quick
release and cause it to lose its function. Insufficient
clamping force will cause a detrimental transmission of
force. This can cause components to break. This will
result in a crash and injuries.
Never fasten a quick release using a tool (e.g.
hammer or pliers).
Only use the clamping lever with the specified set
clamping force.
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 61 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...
