MY19-P073_1.0_09.11.2018
65
Before the first ride
6.3.2 Adjusting the grip distance
Figure 40: Brake lever grip distance
Crash caused by incorrectly set grip distance
If brake cylinders are set incorrectly or installed
wrongly, the braking power may be lost at any time.
This may cause you to fall from the bicycle and injure
yourself.
Once the grip distance has been set, check the
position of the brake cylinder and adjust it as
necessary.
Never correct the brake cylinder position without
special tools. Have a specialist dealer correct it.
The brake lever grip distance can be adjusted to
ensure that it can be reached more easily. Contact
your specialist dealer if the brake handle is too far from
the handlebars or is hard to use.
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 65 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...
