MY19-P073_1.0_09.11.2018
41
Transportation, storage and assembly
5.3.3 Scope of delivery
The bicycle was completely assembled in the factory
for test purposes and then dismantled for
transportation.
The bicycle is 95–98% pre-assembled. The scope of
delivery includes:
• the pre-assembled bicycle
• the front wheel
• the pedals and
• quick release (optional).
5.3.4 Commissioning
Since initial commissioning of the bicycle requires
special tools and specialist knowledge, only trained
specialist staff may perform initial commissioning.
Experience has shown that a bicycle which has not yet
been sold, is spontaneously handed to consumers as
soon as it appears ready to ride.
For this reason, every vehicle must be prepared, so
that it is fully ready for use immediately after being
assembled.
Staff should work through the initial commissioning
check list to prepare the vehicle, so that it is ready
to ride.
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 41 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...
