MY19-P073_1.0_09.11.2018
42
Transportation, storage and assembly
Initial commissioning check list
Mount the wheels, quick release and pedals.
Re-adjust the quick release clamping force if necessary.
Thoroughly degrease the brake discs in disc brakes or the brake
sides and linings in rim brakes with brake cleaner or spirit.
Place handlebars, stem and saddle in the functional position
and check they are firmly in place.
Check all the components to make sure that they are firmly in
place. Check all the settings and the tightening torque on the
axle nuts.
Check the entire cable harness to make sure that it is routed
properly:
• You must prevent the cable harness from coming into
contact with moving parts.
• The cable routes must be smooth and free from sharp edges.
• Moving parts must not apply any pressure or tension to the
cable harness.
Check the light system fittings and the brakes to ensure they
function properly and effectively.
Adjust the headlight.
Take a test ride to check the brake system and gear shift.
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 42 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...
