Pegasus Piazza - Checking the Quick Release; Figure 47: Adjusting the Quick Release Clamping Force; Figure 48: Adjusting the Quick Release Clamping Force

MY19-P073_1.0_09.11.2018
97
Maintenance
8.3.2.1 Checking the quick release
 Check the position and clamping force of the quick
release lever. The quick release lever must be flush
with the lower housing. You must be able to see a
slight impression on the palm of your hand when
you close the quick release lever.
Figure 47: Adjusting the quick release clamping force
 Use a 4 mm hexagon socket spanner to adjust the
clamping lever clamping force if required.
Afterwards, check the quick release lever position
and clamping force.
Figure 48: Adjusting the quick release clamping force
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 97 Friday, November 9, 2018 4:59 PM