Pegasus Piazza - Adjusting the Grip Distance on a Magura Brake Lever; Figure 41: Using the Setting Screw (2) to Adjust the Distance from the

MY19-P073_1.0_09.11.2018
66
Before the first ride
6.3.2.1 Adjusting the grip distance on a Magura brake lever
Alternative
Use a T25 TORX® wrench to turn the setting screw to
adjust the grip distance.
 Turn the setting screw in the minus (–) direction.
 The brake lever moves closer to the handlebar grip.
 Turn the setting screw in the plus (+) direction.
 The brake lever moves away from the handlebar
grip.
Figure 41: Using the setting screw (2) to adjust the distance from the brake
lever to the handlebar grip (1)
1
2
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 66 Friday, November 9, 2018 4:59 PM