MY19-P073_1.0_09.11.2018
44
Transportation, storage and assembly
Insert the securing screw on the non-drive side.
Figure 17: Pushing the quick release lever into the axle
Tighten the securing screw with a 5 mm hexagon
socket spanner to 5–6 Nm.
The lever is mounted.
Figure 18: Tightening the securing screw
EN_MY19-P073_1.0_31.08.2018_Pegasus Fahrrad MY19_Inhalt.book Page 44 Friday, November 9, 2018 4:59 PM
To Next Page
Loading...