Pentair FLECK 5810 SXT - Programming; Display

Installer Manual Fleck 5810 - SXT - Programming
52 / 106 Ref. MKT-IM-016 / C - 08.06.2018
6. Programming
6.1. Display
1. Parameter display → C: Unit capacity;
→ CD: Current day;
→ CT: Regeneration control type;
→ DF: Display format;
→ Dn, n=1 to 7: Day of week;
→ DO: Days override;
→ ET: Relay end time;
→ FM: Flow meter;
→ FR: Current flow rate;
→ H: Feedwater hardness;
→ HR: Hours in service;
→ K: Meter pulse;
→ PF: Peak flow rate;
→ RC: Fixed reserve capacity;
→ RE: Time base relay setting;
→ RF: Regeneration flow;
→ RS: Reserve selection;
→ RT: Regeneration time;
→ SF: Safety factor;
→ ST: Relay start time;
→ SV: Software version;
→ TD: Time of day;
→ TO: Relay time on;
→ TV: Totalizer;
→ V: Filter capacity;
→ VO: Volume interval;
→ VR: Flow base relay setting;
→ VT: Valve type;
→ VU: Volume used.