Pentair FLECK 5810 SXT - Current Day (CD); Flow Meter Type (FM)

Installer Manual Fleck 5810 - SXT - Programming
Ref. MKT-IM-016 / C - 08.06.2018 67 / 106
6.5.15. Current day (CD)
Set the current day.
Note
The day of week parameter is only available if day of the week mode has been set in
regeneration control type selection.
Note
The current day is defined from D1 (Monday) to D7 (Sunday).
6.5.16. Flow meter type (FM)
Note
The flow meter type parameter is only available if the regeneration control type has been
programmed for volumetric regeneration.
Select the flow meter type.
Options:
• P0.7: ¾" paddle wheel meter;
• t0.7: ¾" turbine meter;
• P1.0: 1" paddle wheel meter;
• t1.0: 1" turbine meter;
• t1.2: 1¼" turbine meter;
• P1.5: 1½" paddle wheel meter;
• t1.5: 1½" turbine meter;
• P2.0: 2" paddle wheel meter;
• Gen: generic or other non-Fleck meter.
AP Press or to set the current day.
AQ Press to validate the selection and move to the next parameter.
AR Press or to select the flow meter type.
AS Press to validate the selection and move to the next parameter.