Pentair FLECK 5810 SXT - Valve Type (VT); Regeneration Flow (RF); Regeneration Control Type (CT)

Installer Manual Fleck 5810 - SXT - Programming
60 / 106 Ref. MKT-IM-016 / C - 08.06.2018
6.5.4. Valve type (VT)
Select the valve type 5810.
Options: 5800, 5810 & 5812.
6.5.5. Regeneration flow (RF)
Select the regeneration flow.
Options:
• dF1b: Standard downflow single backwash;
•O-UF: Other upflow;
•O-dF: Other downflow;
• UFFF: Upflow fill first;
• UFbd: Upflow brine first;
• FLtr: Filter, to be used with filter piston only;
• dF2b: Standard downflow double backwash.
6.5.6. Regeneration control type (CT)
Select the regeneration control type.
Options:
• Fd: Meter delayed;
• FI: Meter immediate;
•tc: Time clock;
• dAY: Day of the week.
G Press or to select the valve type.
H Press to validate the selection and move to the next parameter.
I Press or to select the regeneration flow.
J Press to validate the selection and move to the next parameter.
K Press or to select the regeneration control type.
L Press to validate the selection and move to the next parameter.