Pentair FLECK 5810 SXT - Hours in Service (HR); Volume Used (VU); Reserve Capacity (RC); Totalizer (TV)

Installer Manual Fleck 5810 - SXT - Programming
72 / 106 Ref. MKT-IM-016 / C - 08.06.2018
6.7.4. Hours in service (HR)
Note
Shows the number of hours since the last regeneration, indicating the length of the current
service cycle.
6.7.5. Volume used (VU)
Note
Shows the volume used since the last regeneration.
6.7.6. Reserve capacity (RC)
Note
Shows the programmed reserve volume.
6.7.7. Totalizer (TV)
Note
Shows the total volume used since last installation or last reset.
C Hours since last regeneration display:
D Volume used since last regeneration display (L or Gal depending on display
format programmed):
E Reserve capacity display (L or Gal depending on display format
programmed):
F Totalizer display (L or Gal depending on display format programmed):