Pentax K20D User Manual

62
Basic Operations
3
2 Press the four-way controller (3).
The Flash options screen appears.
3 Use the four-way controller (45) to choose a flash mode.
When not in B (Green) mode, turn the rear e-dial to perform Flash
exposure compensation. (p.136)
4 Press the 4 button.
The camera is ready to take a picture.
• When the mode dial is set to B, C and D can be selected, when set to
b, L, a or p, you can select E, F, k and r, and when set to M,
you can select E, F and r. For any other mode, E, F, G, H, I and
r can be selected.
• When the mode dial is set to A, the available flash modes vary depending
on the settings that have been saved.
0.0
0 .0
0.0
OK
O K
OK
OK
Flash Mode
F la sh M od e
Flash On
F la sh O n
Flash Mode
Flash On
Downloaded From camera-usermanual.com Pentax Manuals

Pentax K20D Specifications

General

Camera Type	Digital SLR
Sensor Type	CMOS
Sensor Size	23.4 x 15.6 mm
Resolution	14.6 MP
Continuous Shooting Speed	3 fps
Image Stabilization	Sensor-shift
Screen Size	2.7 inches
Screen Resolution	230, 000 dots
Storage Media	SD/SDHC
Dimensions	141.5 x 101 x 70 mm
Weather Sealing	Yes
Image Processor	PRIME (Pentax Real Image Engine)
Shutter Speed	30-1/4000 sec
Viewfinder	Optical (pentaprism)
Battery	Rechargeable Lithium-Ion battery
ISO Range	ISO 100 - 3200 (expandable to 6400)