PEP Modular Computers Modular Computers RS485 - Smadc1 Clrled

SMART I/O User’s Manual
©1996 PEP Modular Computers GmbHOctober 01, 1996 Page 5 - 99
5
Chapter 5 Analog Modules
5.4.8.6 SMADC1ClrLed
Syntax
error_code SMADC1ClrLed(u_int8 PortNr, u_int8 LedNr);
Description
This function switches off one of the two LEDs fitted to the SM-ADC1.
Input
u_int8 PortNr SM-Port number to be accessed
u_int8 LedNr Number of the LED to switch off (1-2)
Output
error_code SUCCESS
E_SEEK if module was not initialised
E-BMODE if the module is unknown
or standard OS-9 error code (refer to the OS-9
Technical Manual Error Codes Section).
Example
RetVal = SMADC1ClrLed(0, 2);