SMART I/O User’s Manual
©1996 PEP Modular Computers GmbHMarch 12, 1996 Page 1 - 25
Introduction
1
The error messages that are shown in figure 1.5.3.2 are normal as the system
is trying to create files or directories in the RAM disk that are already
present.
If no further messages appear, then the installation is complete. Should the
terminal result in anything different than shown then check through the
installation steps again before contacting PEP for help.
The three green LEDs mentioned earlier show the state of
• PROFIBUS 5V
• System 5V and
• Power ON
To Next Page
Loading...