SMART I/O User’s Manual
March 12, 1996
©1996 PEP Modular Computers GmbH
Page 2 - 38
Chapter 2 SMART-BASE
Example to download ISA11 module and store in FLASH
Start the isa terminal in MS Windows:
Press the <ENTER> key three times to display the following screen prompt:
Isa:
Start kermit on the target system
Isa: kermit ri <ENTER>
Select the menu item transfers-send binary file from the windows terminal
and select the file flash on the PC to transfer
Load flash into memory
Isa: load -ld/dd/APL/flash
Start kermit on the target system again
Isa: kermit ri <ENTER>
Select the menu item transfers-send binary file from the windows terminal
and select the file isa11 on the PC to transfer
Append the file to the existing flash contents
flash -b=SMART -d=d00000 -u -i=/dd/APL/isa11
To Next Page
Loading...