8:22
Embroidery mode - edit
Embroidery edit pop-ups
Delete selected designs?
Your machine will ask you to confi rm when you
have selected to delete more than one design.
Delete all designs?
Your machine will ask you to confi rm when you
have selected to delete all designs or when using
delete long touch.
Design is too complex
If the design is too complex, the resize process will
not start when you touch OK to close the resize
window. Reduce the size and try again, or use the
4D™ software. It is available to purchase from
your local authorized PFAFF® dealer.
Replace fi le?
The fi rst time you try to save a design with the
same name as a design fi le that already exists, your
machine will ask you to confi rm this.
If you keep working on the same design and save
again, your machine will not ask again.
Remove hoop
This pop-up will appear when a function has been
chosen that forces the embroidery unit to move
outside the limits for the attached hoop. In order
for the embroidery arm to move freely, remove
the hoop and then touch OK. To abort the function
touch Cancel.
To Next Page
Loading...
Need help?
General
