8:9
20A
B
C
D
E
F
Embroidery mode - edit
More options (20)
Grid (A)
Touch the grid icon (A) to activate/deactivate a
grid on the embroidery fi eld. The grid is used as
a guide when combining or placing designs. The
distance between the grid lines equals 20mm. As
you zoom in on the embroidery fi eld, the distance
between these lines reduces to 10mm and 5mm,
indicated with lighter lines.
Background color (B)
Touch the background color icon (B) to change the
active background color in the embroidery fi eld. A
window will appear where you can select from 64
different colors.
Background fabric (C)
Touch the background fabric icon (C) to activate/
deactivate the background fabric. When activated
a fabric texture will be shown in the embroidery
fi eld. To change the color of the fabric use the
background color icon (B).
3-dimensional view (D)
Touch the 3-dimensional view icon (D) to turn on
or off a 3-dimensional view of the designs in the
embroidery fi eld.
By default, the designs are displayed in
2-dimensional view in the embroidery fi eld. In
2-dimensional view, the designs load faster on the
screen and it is easier to see the color blocks in the
design. The view setting remains as selected even
when you turn your machine off.
Move to park position (E)
Touch the park position icon (E) to move the
embroidery arm to park position for storing the
embroidery unit.
The hoop must be removed fi rst, to avoid damage.
Restore current state (F)
Touch restore current state (F) to automatically
move from embroidery edit to embroidery stitch-
out. When the design is reloaded, you will start to
embroider where you stopped.
If any design is loaded to embroidery edit when
you restore current state, it will be deleted.
To Next Page
Loading...
Need help?
General
