9:4
8
9
7
E
G
F
4
5
6
Embroidery mode - stitch-out
Embroidery information (E, F, G)
The current stitch in the design or combination is
shown next to the picture (E). The number after
the slash shows the total number of stitches in the
design or combination.
The current stitch in the current color block is
shown next to the picture (F). The number after
the slash shows the total number of stitches in the
current color block.
An estimation of the embroidery time for the
current color block is shown next to the picture (G).
Current stitch (4)
Touch + to step forward and - to step backwards
stitch by stitch. Use the - icon to move backwards
a few steps if the needle thread breaks or runs
out. Touch and hold to move through the stitches
quickly. The crosshair will follow the stitches in the
embroidery fi eld.
Go to stitch (5)
To move to a particular stitch in the design touch
the go to stitch icon. A pop-up will appear, where
you can enter the desired stitch number. Current
stitch will then move to that stitch number. If the
number entered is too large, current stitch will
move to the last stitch in the design(s).
Thread tension (6)
When embroidering with specialty thread or
fabric you may need to adjust the thread tension
to achieve the best result. Thread tension can be
adjusted up or down using the + and the -.
To Next Page
Loading...
Need help?
General
