3:11
GH
I
ABC
Pfaff HD screen
Sound settings (B)
You can change the sound settings on your
machine for different situations. First select from
the list (G) which sound event you want to change.
Then select the sound (H) you want to play by
touching the button. You will be able to hear the
sound when you touch the sound button. Each
event can have a different sound.
User defi ned sound
If you want to import your own sound fi les, use
the user defi ned icon (I) at the bottom of the list. A
long touch of this icon will open Files & Folders.
Find your sound fi le and touch the OK icon. The
name of the loaded sound fi le is shown next to the
button.
The sound length for icon acknowledge, button/
icon disabled and for warning or attention pop-
ups is maximum 5 seconds. For starting up and
embroidery fi nished, the maximum sound length
is 30 seconds. The sound fi les must be stored either
on your machine or, if connected, an external
device or your PC.
Note: You can only play PCM encoded WAV-fi les. For
optimal result the fi le should be 8-bit mono. The machine
will not support compressed sound fi les.
We recommend always storing your sound fi les on your
machine before importing them into user defi ned sound.
Audio repeat
When active, the signal for some warning or
attention pop-ups is repeated in intervals until it is
cancelled.
Volume
You can change the volume using the slider.
To Next Page
Loading...
Need help?
General
