9:3
2
1
A
3
D
C
B
Embroidery mode - stitch-out
Crosshair (1)
When embroidering, a crosshair indicates current
needle position on the screen.
Color list (2)
All colors in the loaded design(s) are shown in the
order they will be embroidered. Each listed color
shows color order and number. Also shown are
the thread manufacturer, thread weight and color
number. Use the scroll bar to see all of the colors in
the list. To go to the next color block, just touch it
in the color list.
Thread manufacturer and thread number are
displayed for designs in .VP3 and .VIP-format. If
changing color, some information might be lost.
Example (A): 1:2, RaRa 40, 2561 means the second
thread color in the fi rst loaded design is RobisonAnton
40 weight, thread number 2561.
To make changes to the color list, return to
embroidery edit.
Zoom (3)
Use the + and - icons to zoom in or out in the
embroidery fi eld. Touch the zoom icon to open a
list of zoom options.
Zoom to box (B) lets you decide how much and
where to zoom in the embroidery area. First, select
zoom to box in the pop-up. The zoom icon starts
fl ashing, indicating that zoom to box is active. In
the embroidery fi eld on the PFAFF® HD screen,
touch and drag with your stylus to defi ne the
area to be zoomed. Zoom to box will then be
deactivated.
Note: While zoom to box is active the touch functions
are disabled. To deactive zoom to box without making
any selection, touch any of the touch function icons.
How much you can zoom in depends on the selected
hoop.
Zoom to all (C) will show all the designs in the
embroidery combination in the largest view
possible.
Zoom to hoop (D) will adjust the view to show the
selected hoop.
To Next Page
Loading...
Need help?
General
