7:5
BA
B
C
Embroidery Mode - Preparations
Getting started embroidering
1. After attaching the embroidery unit and
embroidery foot, insert a bobbin with
lightweight bobbin thread.
Note: Make sure that the IDT is disengaged.
2. Hoop a piece of fabric and slide on the hoop.
3. Open selection menu (A) to select a design.
Touch it once to load to embroidery edit.
4. The machine automatically switches to
embroidery edit. The design is placed in the
center of the hoop.
5.
Switch from embroidery edit to embroidery
stitch-out by touching the embroidery toggle
icon (B) on the task bar.
6. Thread the machine with the fi rst color in the
color list (C).
To Next Page
Loading...
