XF Camera System Manual |
When installing a new focusing screen, pinch the tab of the screen with the
tweezers, and place the screen onto the frame and as far as possible into the
back end of the frame. Make sure that the tab is on the left side, otherwise the
focusing screen will be upside down.
Push the screen frame upwards by pressing the tweezers against the corner of
the frame.
Slowly tilt the XF Camera Body to its upright position, while keeping the
tweezers against the frame, as shown.
Finally, press the frame downwards close to the screen release lever until you
hear a click. The screen is now properly installed.
To Next Page
Loading...
