XF Camera System Manual |
IQ Digital Back Basic
Settings
Basic settings
At the Home screen, WB, ISO and File Format are displayed at the center of
the screen in order to always give a clear indication of what these important
settings are.
ISO
The sensitivity range is dependent on the IQ Digital Back model. The default
setting for the IQ Digital Back is always the lowest ISO position. This ensures the
best possible image quality output, when the Digital Back is reset to default.
Choose the appropriate ISO value by selecting ISO from the Home Screen.
Or using the Rear Dial on the XF Camera.
White Balance
There are four White Balance presets plus an Auto option, that can be selected
directly from the Digital Back Home Screen. Choose between Auto (default),
Daylight, Fluorescent, Tungsten and Flash. It is also possible to create a custom
White Balance please refer to Custom White balance section in this manual.
Choose the appropriate white balance by selecting WB from the Home Screen
Restoring the defaults
The IQ Digital Back is supplied preconfigured with a number of default settings
ready for use, either when purchased by itself, or with the XF. After adjustment
of these settings, you can restore the back to the factory defaults from the
back’s screen by pressing Menu > Restore to Default. As a convenient feature,
you have the option to choose whether the current copyright information,
splash and background screens, custom white balance values and WiFi
settings should be reset or kept during the restore. This feature is described in
more detail later in this manual. Note the Language and Date and Time remain
unaltered.
Home Screen
WB selection
To Next Page
Loading...
Need help?
General
