71XF Camera System Manual |
XF Camera Body Custom Presets
Custom Presets
Three Custom Presets can be set on the XF Camera Body. This feature allows
you to save and reuse combinations of settings you have made to the system
to suit your preferences and workflow. Custom Presets also minimize
inadvertent use of settings, where the same camera may be adopted for very
dierent assignments or commissions throughout the day. All the current
settings can be saved in a Custom Preset.
Save Custom Presets
Set up the camera with the various settings required, then press the Rear Key
on the XF top screen and from the menu select Save Setup > Custom 1 > Save
Setup > Yes / No. Two further groups of settings can be stored (to Custom 2
and Custom 3).
If you change a setting while using the camera in one of the Custom modes
and want that set updated, simply access the camera menu and select Save
Setup, remembering to save it to the relevant Custom set.
Changing between Custom Presets
Custom presets are intended to provide a rapid change between groups of
settings and features. Press the Rear Key on the XF top screen and from the
menu select Load Setup > Custom 1, 2 or 3.> Load Custom Settings > Yes / No.
Selecting Yes instantly enables the group of settings. Settings may be
continued to be changed afterwards as normal, and to return to the initial
group of settings, simply repeat the procedure described above.
Save Custom Setup to CF Card
In addition to saving custom setups in the XF Camera, you can also save them
to the CF card as a backup file. This is done from the IQ touch screen. Select
Menu > XF Menu > Custom Setup > Save To CF. Then choose the Custom
Setup you want to save, and press the green check mark to accept. The
backup file is saved at the root of the CF card and called XFSystem.set, in case
you want to copy it to your computer.
Load Custom Setup from CF Card
Once you have saved a Custom Setup to the CF Card, you can load it back
into the XF Camera. This is done from the IQ touch screen. Select Menu > XF
Menu > Custom Setup > Load From CF. First, choose the current Custom
Setup on the XF Camera that you want to replace. Next, choose which of the
saved Custom Setups on the CF card you wish to load. Select the one you
want, then press the green check mark to load it.
XF Custom Presets and
System Backup
Custom Settings
Save Custom Setup to CF card
Choose the Custom Setup to load from CF card
To Next Page
Loading...
Need help?
General
