85XF Camera System Manual |
All IQ3 and IQ2 digital backs have built-in WiFi and can connect wirelessly with
an Apple iOS device (iPhone, iPad and iPod touch) running the Capture Pilot
app from Phase One. Capture Pilot enables the user to remotely control the
camera’s exposure settings and trigger the shutter on XF IQ3 and IQ2 camera
systems. In addition, Capture Pilot allows browsing and geotagging of images,
and even supports remote live view with the Phase One IQ3 50MP, IQ3
100MP, IQ3 100MP Achromatic and IQ250 MP backs.
As an option with Capture One Pro, Capture Pilot also enables remote operation
and triggering of a tethered camera. The free to download app can also be a
useful solution for clients wishing to view images away from computer screen,
either in the studio or on location.
Note raw files are not transmitted to, or stored on, the iOS device. The original
files remain on the camera’s CF card and/or the tethered computer’s hard disk,
depending on the setup.
For more information, please see:
http://help.phaseone.com/CO11/Capture_Pilot.aspx
WiFi Setup
Before enabling WiFi on the IQ Digital Back please download the free Phase
One Capture Pilot app from the Apple App Store and install it on your iOS
device.
Version 1.10 requires iOS 9, but iOS 10 or later is recommended.
Capture Remote, the remote camera operation function of Capture Pilot is
automatically enabled upon wireless connection with an IQ Digital Back.
For control of other makes of DSLRs, an in-app purchase of Capture Remote is
required. Please check compatibility, before making a purchase. Note for other
makes, remote control applies to cameras tethered to a computer running
Capture One Pro.
Built-In WiFi and
Capture Pilot
Download Capture Pilot from App Store
To Next Page
Loading...
Need help?
General
