XF Camera System Manual |
Restore the Custom
Presets to Default
Rename Custom Setup
In order to better recognize each of your Custom Setups, you can rename
them to something more descriptive, like ‘Landscape’ or ‘Studio’. This is done
from the IQ touch screen with the built-in keyboard. Select Menu > XF Menu >
Custom Setup > Rename. Then choose the Custom Setup you want to rename,
and enter the name on the touch keyboard. Once you are done, press the
green check mark to accept the change.
Restore to Default
To return the camera to the default settings, access the camera menu and
select Load Setup > Restore To default…
Note the group of settings registered with the Custom Presets will be not be
cleared using this option.
Using the touch keyboard
to rename the Custom Setup
To Next Page
Loading...
