97XF Camera System Manual |
Shooting with Zero Latency
Make sure that the shutter is open by using the Preview Lever (1) on the lens.
The shutter is open when the red dot is visible.
Enter Live View in the IQ Digital Back by
tapping on the contextual menu icon (A) of
the Rear Touch Screen, then press the Live
View icon (B).
Make any desired adjustments to Tilt, Shift
and Swing on the Cambo Technical Camera.
Adjust focus (2). If you want to review the depth of field, remember to close
the aperture down to the desired working value with the Aperture Selector (3)
on the lens.
Exit Live View on the Digital Back.
Adjust the aperture with the Aperture Selector (3) on the lens, if necessary.
Adjust the shutter time with the Shutter Speed Selector (4).
The ISO value is adjusted on the IQ Digital
Back by pressing ISO on the home screen.
Close the shutter with the Preview Level (1),
so the red dot is hidden.
Spring-load the mechanical shutter by using the Shutter Cocking Lever (5) on
the lens.
Push the shutter release cable to make the capture.
Remember that you need to spring-load the shutter again by using the Shutter
Cocking Lever (5) before every new capture.
5. Shutting Cocking Lever
4. Shutter Speed Selector
3. Aperture Selector
1. Preview Lever
2. Focusing Ring
A: Menu
B: Live View
To Next Page
Loading...
Need help?
General
