Pitney Bowes SendPro C Lite - Installing the SendPro C Lite, SendPro C, SendPro+

Filling the moistener tank
Your device will need refills of sealing solution in order to seal envelopes. Follow these steps to fill the
moistener tank.
1. Check the level of sealing solution in your moistener tank (1).
2. Add enough sealing solution to bring the sealant level up to the bottom of the fill hole (2). Do not
overfill the tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely wet.
Sealing envelopes when you print postage
You can seal envelopes and print postage at the same time with your SendPro C Lite, SendPro C.
7 • Sealing
Pitney Bowes User Guide June 2022 61