Lithium ion battery
This product contains a lithium ion battery. The battery must be recycled or disposed of properly. If you
are leasing this product, you must return it to Pitney Bowes. Alternatively, contact your local waste
disposal or recycle facility for instructions on how to dispose of it properly.
Agency compliance information
Agency Compliance Information can be found in the product’s user guide. The user guide is available
for download at:
l
Australia - http://www.pitneybowes.com/au/support
l
New Zealand - http://www.pitneybowes.com/nz/support
Important safety notes
Follow the normal safety precautions for all office equipment.
l
Please read all instructions before you attempt to operate the system. Save these instructions
for future use.
l
Use only Pitney Bowes-approved supplies, in particular aerosol dusters. Improper storage and
use of aerosol dusters or flammable aerosol dusters can cause an explosive-like condition that
could result in personal injury and/or property damage. Never use aerosol dusters labeled
flammable and always read instructions and safety precautions on the duster label.
l
Use only the AC Power cord and AC Power adapter with the optional Thermal label printer
supplied with your machine and plug it into a properly grounded wall outlet that’s located near
the printer and easily accessible. Failure to properly ground the power adapter can result in
severe personal injury and/or fire.
l
The power cord wall plug is the primary means of disconnecting the machine from the AC
supply. The unit is on whenever it is plugged into a live receptacle, even though the operator
display may be blank.
l
To obtain supplies, please contact our Supply Line™ to place orders.
l
Material Safety Data Sheets can be obtained through the web or from our Supply Line™. Refer
to the Contact Information List for more information.
l
Avoid touching moving parts or materials while the machine is in use. Keep hands, loose
clothing, jewellery and long hair away from all moving parts.
l
Do not remove covers or defeat safety interlock switches. Covers enclose hazardous parts that
should only be accessed by properly trained service personnel. Immediately report to service
any damaged or non-functioning components that renders the unit unsafe.
15 • Product Information
Pitney Bowes User Guide June 2022 116
To Next Page
Loading...
