Planmeca Compact i3 - Planid Reader Settings

21 PlanID reader settings
If the dental unit is equipped with PlanID reader, the reader must be enabled
after installation.
Enter the service mode 600. In this service mode you can select the area of
operation:
• OFF = NFC and UHF radio disabled (default)
• EU = European union 3
• US = North America 3
• CA = Canada
• Cn = China
• In = India
• Kr = Korea
• AU = Australia
• nZ = New Zealand
NOTE
Do not use PlanID reader outside supported regions.
Enter the service mode 602. In this service mode you can enable the PlanID
reader.
21 PlanID reader settings
96 Planmeca Compact i3 Installation manual