EasyManua.ls Logo

Planmeca Compact i3 - 6 Understanding Product Symbols and Labels

Planmeca Compact i3
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Inside patient area: Outside patient area:
1. Dental unit 7. External PC
2. Planmeca monitor
3. Planmeca operating light
4. Foot control. Use only IEC 60601-1 approved
power source supplied by Planmeca
5. Tablet
6. Planmeca intraoral scanner
2.7 Fire stopping of installation site
NOTE
The pipe and cable penetrations must be sealed with fire stopping materials.
The products given in this section are only examples.
The fire stopping must be performed in accordance with the national
regulations.
NOTE
Follow the fire stopping products’ installation instructions.
Add fire stopping laminate or mastic (e.g. Intumex LF, Intumex MG) to the
pipes as shown in the figure below.
2 Pre-installation requirements
Installation manual Planmeca Compact i3 11

Table of Contents

Other manuals for Planmeca Compact i3

Related product manuals