Planmeca Compact i3 Installation Manual

19 Adding service contact details
About this task
Before handing over the dental unit to the customer, you can add service
contact details to the dental unit so that the customer knows whom to
contact when they need technical assistance.
Steps
1. Press Program.
2.
Press About this unit.
3.
Press Service.
4. Press Service contact details.
5. Fill in the service contact details.
The following details must be filled in:
• First name
• Last name
• Phone
• E-mail
Edit the contact details by pressing the Edit button next to each item.
Enter the PIN-code 1701 when prompted.
A new window with an alphanumeric keyboard opens where you can edit
the contact detail.
Use the arrows in the top row to move to the left and right in the text.
The symbols below the arrows in the top row can be used as they are, or
as a shortcut to letters containing that symbol. For example, when you
press ^ for about one second, letters with the symbol ^ are displayed.
You will automatically return to the normal view when you enter one of
the letters. To return to the normal view without entering a letter, press
the symbol again.
To display special characters, press Alt. Press Alt again to return to the
normal view.
To save the edited contact detail, press OK. To exit the window without
changing the name, press Close.
6. Press OK to close the
Service contact details window.
19 Adding service contact details
94 Planmeca Compact i3 Installation manual

Planmeca Compact i3 Specifications

General

Brand	Planmeca
Model	Compact i3
Category	Dental equipment
Language	English