10828200.B Administration 15
Warning: Before and after each use, follow these instructions to disinfect the
Planmeca PlanScan System. Do not substitute any other cleaning solution or procedure.
Under no circumstances should you use any paint thinner, solvents, or harsh chemicals.
Use only a non-woven sponge or pre-moistened germicidal cloths when cleaning the
Planmeca PlanScan System.
1 Using a clean, non-woven sponge that has been saturated with a hospital grade, TB-rated
germicide or pre-moistened germicidal cloths, apply the germicide to the entire surface of the
scanner base, scanner holder, mouse, mousepad, and any other surfaces that you touch that
were not covered by a disposable barrier. Do not spray the germicide directly on the items and
do not submerge the scanner or mouse in the germicide.
2 Follow the germicide manufacturer’s instructions.
Additional Assistance
Go to http://e4d.com for videos and downloadable documentation. If you have questions,
please contact Customer Support at:
Toll Free 800-537-6070
E-mail customersupport@e4d.com
Fax 972-479-1106
Hours of Operation
7 am – 7 pm CT (Monday - Thursday)
8 am – 5 pm CT (Friday)
Web site www.e4d.com
Mailing Address
D4D Technologies LLC dba E4D Technologies
650 International Pkwy
Richardson, TX 75081 USA
To Next Page
Loading...
