Planmeca PlanScan - Warning and Identification Labels

Firewire Warning Label
There is a warning label near the Firewire connection.
DO NOT PULL
CABLE TO
DISCONNECT
BENDING
OR TWISTING
CABLE MAY IMPACT
SYSTEM USABILITY
Product Identication Labels
Axed to the scanner are product identication labels that contain identication and safety
information. Be certain to read all product labeling.
Note: If any of the labels are missing or illegible, please contact Planmeca After
Sales for replacement labels.
Note: The labels may have changed since this book was published.
450 nm, 4.95mW CW
IEC/EN 60825-1:2007
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
450 nm, 4.95 mW CW
IEC/EN 60825-1:2007
PLANSCAN
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
450 nm, 4.95 mW CW
IEC/EN 60825-1:2007
PLANSCAN
54 Scanner Specications Planmeca PlanScan User Manual