6 Introduction Planmeca PlanScan User Manual
Planmeca
1
Introduction
The Planmeca Fit
TM
System is a complete optical impression system for CAD/CAM of dental
restorations intended for dental oces or laboratories. The system comprises a Planmeca
PlanScan digital impression scanner, Planmeca Romexis CAD/CAM design software module,
and Planmeca PlanMill40 mill.
The Planmeca PlanScan scanner takes digital impressions which can be designed and
customized on the Planmeca Romexis CAD/CAM design software. The impressions can be sent
via Planmeca Romexis Cloud to Planmeca or a certied laboratory for design and milling or
exported to a third party.
Note: Caution: US Federal law restricts the Planmeca PlanScan to sale by or on the
order of a dentist.
The Planmeca Fit System requires Planmeca Romexis software revision 3.4.0.R or later.
Associated Documentation
Planmeca Romexis User’s Manual (publication number 10014593).
Note: Throughout the documentation, important notes and items of interest are
formatted like this example.
Warning The orange Warning denotes something that can cause personal injury or
physical damage to the equipment.
Some of the screenshots may have been taken in earlier software versions and may not exactly
match your screen.
Indications for Use
The Planmeca PlanScan System is an optical impression system for CAD/CAM of dental
restorations. It is a device used for recording topographical characteristics of teeth, dental
impressions, or stone models by digital methods for use in computer aided design and
manufacturing of dental restorative prosthetic devices.
Contraindications
The Planmeca impression system is not indicated for orthopedics or any indication beyond
dentistry.
To Next Page
Loading...
Need help?
General
