Plockmatic BLM 50 User Manual

49
2
The table below shows highest supported BookFold pressure settings on BLM35 and BLM50 Pro-
duction Booklet Maker systems.
NOTE:
The following table indicates maximum BookFold pressure setting that can be used on the
Production Booklet Maker systems without slowing the printer down.
Number of sheets A4 A3 SRA3 8.5x11" 11x17" 12x18"
1-5 2 4 7 1 4 7
6-10 4 7 8 4 7 8
11-15 7 8 8 7 8 8
16-20 7 8 8 7 8 8
21-30 8 8 8 8 8 8
31-50 8 8 8 8 8 8
NOTE:
When square forming thick booklets with a thin cover, the cover sheet may be spaced away from
the body of the book and/or it may be crushed in the square forming process.
This phenomenon is eliminated/reduced by using a heavier media as the cover. If using a heavier
cover is not an option, using a lower BookFold pressure setting in the square forming process may
improve booklet appearance.
Selecting BookFold pressure setting
From the Settings for Booklet Production
screen, press the [BookFold] button.
Press the [Manual] button and select the de-
sired amount of pressure using the [+] and [-]
buttons. Save setting by pressing the green
[check] button.

Plockmatic BLM 50 Specifications

General

Brand	Plockmatic
Model	BLM 50
Category	Booklet makers
Language	English