Poly G7500 Administrator's Guide

6. If you have more than one user interface configured on the control processor, select a user
interface to display on the TC8 or TC10 device.
7. Select Submit.
After you set up the Extron Controller app on the TC8 or TC10 device, users can access the
application to control electronic shades, monitors, projectors, and any smart lighting configured with
the Extron control processor.
NOTE: When you enable to always show the status bar in the Extron Room Control settings, the
TC8 or TC10 device screen flickers frequently. Hide the status bar to prevent the screen from
flickering.
Set Up to the Extron Control App on the TC8 or TC10 Device 103

Poly G7500 Specifications

General

Network	Gigabit Ethernet
Bluetooth	Bluetooth 5.0
Interoperability	SIP, H.323
Audio Features	NoiseBlockAI, Acoustic Fence
Camera	Supports EagleEye cameras
Connectivity	HDMI, USB, Ethernet
Video Standards and Protocols	H.264 AVC, H.265
Video Input	1 x HDMI
Video Output	2 x HDMI
Audio Standards	G.711, G.722, G.719
Audio Input	3.5 mm line-in
Audio Output	3.5 mm line-out, HDMI
Wireless	Wi-Fi 802.11ac
Security	AES-128
Daisy Chain	Supported with microphone arrays
Power Source	AC power
Video Resolution	Up to 4K Ultra HD (3840 x 2160) at 30 fps