Poly G7500 Administrator's Guide

IMPORTANT: If you use an Ethernet port to power the Studio E70, the Ethernet port must be able
to supply 30W PoE+ Type 2/Class 4 power.
Table 2-12 Poly Studio E70 Port Descriptions
Ref. Number Port Description
1 Reset button
2 Ethernet port (Can be used to provide power to the camera)
3 USB-C port
4 Power cord port
Poly Studio E70 Privacy Shutter Behavior
The privacy shutter automatically opens and closes depending on the state of the connected video
system.
NOTE: Shutter behavior may vary depending on the partner application.
System Event
Shutter Behavior
The system powers on Shutters open
The system powers off Shutters close
NOTE: If you remove power immediately, the shutters don't
close.
The system enters sleep mode or digital signage starts and
the
Camera Sleep Setting is set to Save Energy
Shutters close
The system enters sleep mode or digital signage starts and
Camera Sleep Setting is set to Fast Wake
Shutters remain open
NOTE: When Fast Wake is set, the shutters never close.
You wake the system Shutters open
You wake the system and the Studio E70 isn’t the primary
camera
Shutters remain closed
You select the Studio E70 as the primary camera Shutters open
The Studio E70 isn't the primary camera and is idle for five
minutes
Shutters close
Poly Studio E70 Privacy Shutter Behavior 15

Poly G7500 Specifications

General

Network	Gigabit Ethernet
Bluetooth	Bluetooth 5.0
Interoperability	SIP, H.323
Audio Features	NoiseBlockAI, Acoustic Fence
Camera	Supports EagleEye cameras
Connectivity	HDMI, USB, Ethernet
Video Standards and Protocols	H.264 AVC, H.265
Video Input	1 x HDMI
Video Output	2 x HDMI
Audio Standards	G.711, G.722, G.719
Audio Input	3.5 mm line-in
Audio Output	3.5 mm line-out, HDMI
Wireless	Wi-Fi 802.11ac
Security	AES-128
Daisy Chain	Supported with microphone arrays
Power Source	AC power
Video Resolution	Up to 4K Ultra HD (3840 x 2160) at 30 fps