Poly G7500 Administrator's Guide

Table 2-13 G7500 System LED Status Indicators
Indicator Status
Blinking white Powering on
Solid white Working normally
Solid green In a call
Blinking amber Update in progress.
Solid amber Sleeping
Blinking red Error preventing normal operation
Solid red Muted microphone
LED Status Indicators for the Studio X70 System
Use the LED on the right side of the system to help you understand the system's behaviors.
Table 2-14
Basic Studio X70 LED Indicators and Status
Indicator Status
Solid white Device is idle and standing by
Pulsing white Boot initiation in progress
Pulsing amber Firmware update or factor restore in progress
Blinking blue and white Bluetooth pairing
Solid blue Bluetooth paired
Solid green Active call in progress
Solid red Audio mute
LED Status Indicators for the Studio X52 System
Use the LED on the right side of the system to help you understand the system's behaviors.
LED Status Indicators for the Studio X70 System
17

Poly G7500 Specifications

General

Network	Gigabit Ethernet
Bluetooth	Bluetooth 5.0
Interoperability	SIP, H.323
Audio Features	NoiseBlockAI, Acoustic Fence
Camera	Supports EagleEye cameras
Connectivity	HDMI, USB, Ethernet
Video Standards and Protocols	H.264 AVC, H.265
Video Input	1 x HDMI
Video Output	2 x HDMI
Audio Standards	G.711, G.722, G.719
Audio Input	3.5 mm line-in
Audio Output	3.5 mm line-out, HDMI
Wireless	Wi-Fi 802.11ac
Security	AES-128
Daisy Chain	Supported with microphone arrays
Power Source	AC power
Video Resolution	Up to 4K Ultra HD (3840 x 2160) at 30 fps