Poly G7500 Administrator's Guide

2. Select Start Video Capture.
The system alerts the conference room participants and asks for approval to begin the video
capture. Once the room participants approve by select Yes, the video capture begins.
In the system web interface, the system reports that the video capture is in progress.
Once complete, the system web interface reports that the video capture is complete and sent to
Poly Lens.
3. In your Poly Lens portal, go to the Diagnostics page to view the video recording.
The video recording displays as a tvpr_ file, and is available for download.
For more information, see Poly Lens Help.
Wake the System Remotely
You can wake the system from the system web interface.
1. In the system web interface, go to Diagnostics > Remote Monitoring.
2. Go to System Wake and select Wake the System.
End a Session
Use this tool to close a sharing session. All live content is stopped, and all blackboards and
whiteboards are deleted.
■
Select . A message appears informing you that the session will end in 15 seconds.
Wake the System Remotely
105

Poly G7500 Specifications

General

Network	Gigabit Ethernet
Bluetooth	Bluetooth 5.0
Interoperability	SIP, H.323
Audio Features	NoiseBlockAI, Acoustic Fence
Camera	Supports EagleEye cameras
Connectivity	HDMI, USB, Ethernet
Video Standards and Protocols	H.264 AVC, H.265
Video Input	1 x HDMI
Video Output	2 x HDMI
Audio Standards	G.711, G.722, G.719
Audio Input	3.5 mm line-in
Audio Output	3.5 mm line-out, HDMI
Wireless	Wi-Fi 802.11ac
Security	AES-128
Daisy Chain	Supported with microphone arrays
Power Source	AC power
Video Resolution	Up to 4K Ultra HD (3840 x 2160) at 30 fps