Polycom Vortex EF2280 User Manual

This command will generate acknowledgements from each of the mic inputs separately.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01MUTEGIM1
Mute all mic inputs.
F01MUTEI11
F01MUTEI21
F01MUTEI31
F01MUTEI41
F01MUTEI51
F01MUTEI61
F01MUTEI71
F01MUTEI81
F01MUTEGIM2
Toggle mute status of all mic inputs.
F01MUTEI1a
F01MUTEI2b
F01MUTEI3c
F01MUTEI4d
F01MUTEI5e
F01MUTEI6f
F01MUTEI7g
F01MUTEI8h ,
where a, b, c, d, e, f, g, and h reflect the mute status (0
or 1) of each of the mic inputs. If this command was
issued after the example above, then the status messages
would be:
F01MUTEI10
F01MUTEI20
F01MUTEI30
F01MUTEI40
F01MUTEI50
F01MUTEI60
F01MUTEI70
F01MUTEI80 .
F01MUTEGIM?
Query mute status of all mic inputs.
F01MUTEI1a
F01MUTEI2b
F01MUTEI3c
F01MUTEI4d
F01MUTEI5e
F01MUTEI6f
F01MUTEI7g
F01MUTEI8h ,
where a, b, c, d, e, f, g, and h reflect the mute status (0
or 1) of each of the mic inputs. If this command was
issued after the example above, then the status messages
would be:
F01MUTEI10
F01MUTEI20
F01MUTEI30
F01MUTEI40
F01MUTEI50
F01MUTEI60

Polycom Vortex EF2280 Specifications

General

Rack capacity	1U
Frequency range	20 - 20000 Hz
Cancellation span	270 ms
Echo cancellation	65 dB
Phantom power	48 V
Nominal input level	0 dB
Output gain	-100 - 20 dB
Output impedance	33 Ω
Maximum output amplitude	23 dB
RS-232 ports	1
Audio connections	2 x 3.5mm
Parallel ports quantity	2
Input voltage	110 - 240 V
Output current	20 mA
Output voltage	5 V
Input frequency	47/63 Hz
Power consumption (typical)	30 W
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	1800 g
Dimensions (WxDxH)	483 x 244 x 45 mm