Polycom Vortex EF2280 User Manual

8.94. MUTEGIL -- Set Mute Status of Line Inputs as a Group
This command sets the mute status of all the line inputs simultaneously. This is different from using a wildcard, *
with the
MUTEI command because that command sets all the mic and line inputs together, while the MUTEGIL
sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01MUTEGIL1
Mute all line inputs.
F01MUTEIA1
F01MUTEIB1
F01MUTEIC1
F01MUTEID1
F01MUTEGIL2
Toggle mute status of all line inputs.
F01MUTEIAa
F01MUTEIBb
F01MUTEICc
F01MUTEIDd ,
where a, b, c, and d reflect the mute status (0 or
1) of each of the line inputs. If this command was
issued after the example above, then the status
messages would be:
F01MUTEIA0
F01MUTEIB0
F01MUTEIC0
F01MUTEID0 .
F01MUTEGIL?
Query the mute status of all the line inputs.
F01MUTEIAa
F01MUTEIBb
F01MUTEICc
F01MUTEIDd ,
where a, b, c, and d reflect the mute status (0 or
1) of each of the line inputs. If this command was
issued after the example above, then the status
messages would be:
F01MUTEIA0
F01MUTEIB0
F01MUTEIC0
F01MUTEID0 .
8.95. MUTEGIM -- Set Mute Status of Microphone Inputs as a
Group
This command sets the mute status of all the microphone inputs simultaneously. This is different from using a
wildcard, * with the
MUTEI command because that command sets all the mic and line inputs together, while the
MUTEGIM sets only the mic inputs.

Polycom Vortex EF2280 Specifications

General

Rack capacity	1U
Frequency range	20 - 20000 Hz
Cancellation span	270 ms
Echo cancellation	65 dB
Phantom power	48 V
Nominal input level	0 dB
Output gain	-100 - 20 dB
Output impedance	33 Ω
Maximum output amplitude	23 dB
RS-232 ports	1
Audio connections	2 x 3.5mm
Parallel ports quantity	2
Input voltage	110 - 240 V
Output current	20 mA
Output voltage	5 V
Input frequency	47/63 Hz
Power consumption (typical)	30 W
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	1800 g
Dimensions (WxDxH)	483 x 244 x 45 mm