Polycom VVX 150 - Broadcasting Messages with Group Paging

Procedure
1 Go to Messages.
2 Select Instant Messages.
3 From the Instant Messages screen, select a message and select Reply.
4 Enter a message and select Send.
Related Topics
Instant Messaging
Delete Instant Messages
You can choose to delete instant messages from your phone.
Procedure
1 Go to Messages.
2 Select Instant Messages.
3 Select a message and select Delete.
Related Topics
Instant Messaging
Broadcasting Messages with Group Paging
Group Paging enables you to send pages—one-way audio announcements—to contacts subscribed to
a page group.
Your administrator can enable a broadcast mode called Group Paging mode. In this mode, you can
broadcast one-way announcements to a specified group of phones, called a Paging Group.
Your system administrator can define up to 25 paging groups and assign a label to each group to
identify the phones in the group, such as All, HR Dept, Shipping Staff, or Executives.
Each group has one of the following priorities:
•
Normal—By default, broadcasts sent to groups 1 to 23 are considered Normal broadcasts. By
default, all phones are configured to receive broadcasts sent to group 1.
•
Priority—By default, broadcasts sent to group 24 are considered Priority broadcasts. A Priority
broadcast interrupts Normal broadcasts or active calls. All phones receive Priority broadcasts
unless Do Not Disturb is enabled.
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 131