Related Topics
Ribbon Communications Multiple Appearance Directory Number - Single Call Appearance
Enable Privacy
After you enable privacy for an active call on a public shared line, you cannot disable privacy for the
call. You can allow other MADN members to join the active call by transferring the call or initiating a
conference call.
Procedure
•
During an active call, do one of the following:
◦
Select Transfer and dial the PRV code given to you by your administrator
For example, dial *91.
◦
Select the Priv soft key, if enabled.
A confirmation tone plays and the call is resumed automatically.
Related Topics
Enabling Privacy for MADN Calls
Disable Privacy Temporarily
You can temporarily disable privacy for an active call on a private shared line to allow other MADN
members to join the call.
Procedure
1 During an active call, press the PRLA soft key or select Hold and dial the PRLA code given to
you by your administrator.
For example, dial *921.
A confirmation tone plays, and the call is resumed automatically. Privacy is disabled for the call
and any member can barge in on the call.
2 After other MADN members have joined the call, press the PRLA soft key or select Hold and
dial the PRLC code given to you by your administrator.
For example, dial *922.
A confirmation tone plays, and the call is resumed automatically.
Related Topics
Enabling Privacy for MADN Calls
Printed from Polycom, Inc. (http://documents.polycom.com) #{renderLang "en" MsgPDFPage} 80
To Next Page
Loading...
